Description

CHASIS FLEXNET DE ALARMA CONTRA INCENDIO EXPANDIBLE A 8 SLC, CON CAPACIDAD RED ACEPTA PROTOCOLO MP, AP, CLIP
Marca: MIRCOM
Modelo: FX-4003-12N

FleX-Net FX-4000N Series
Networkable Intelligent Fire Alarm Control Chassis c/w Flex-Net Main Board
SLC (Signaling Line Circuit): Expandable to 8
Power Supply: 12 Amp
Multi-Protocol: MIX-4000 Devices, Advanced, and Clip
Multi-Language:
- Menus (English, French, Arabic*, Chinese*, Russian*, Spanish, Portuguese), and
- Tags (any language supported by Windows 10).
*needs DSPL-2440 or RAXN-4000LCDG
Conventional Adder Module Loops: 2 (Max. of 8 cards per loop)
Sub-Addressing: to optimize the number of devices in each loop. Multi-criteria devices reserves a single address on the SLC.
Notification Appliances Circuits: 4 Class A/B (Style Z/Y), 1.7 Amps (Each), with Built-in Sync Protocol.
Alarm Queues: 4 with selector switches and LEDs for Alarm, Supervisory, Monitor and Trouble
Event History Logs: 2 Event Logs, 1 for 5,000 Alarm Events and 1 for 5,000 General Events
Panel Configuration: can be done without taking the panel offline.
Configuration Files: 3 Files (Current, Previous and Next Configuration) with ""hot-swap"" support
Boolean Logic Functions: supported
Panel Monitor Utility:
- Real Time Monitoring: Inputs, Outputs, Zones, and System
- Remote Device Activation: for pre-testing inputs/outputs
- Tests Mechanical Equipment on Site: simulates relay output activation
- Supports Main Panel Controls: including System Reset and Signal Silence
- One-Click By-Pass via Software

Order Separately: UB-1024DS (Universal Back Box), DSPL-2440 / DSPL-420DS / DSPL-420-16DS, DOX-1024DSB (Black) / DOX-1024DSR (Red), and FNC-2000 (Fire Network Controller)"

The base panel includes:
• Main Processor Board with built in Network card interface, Voice Evacuation System Interface, and IP Port for OpenGN Workstation or BMS Integration.
• Four (4) Style Z/Y (Class A/B) Notification Appliance Circuits
• RS485/RS232/Ethernet Communication Ports
Software Features:
• Boolean Logic Engine for complex sequences of Operations
• Storage and Management for up to three configuration versions for phased commissioning
• Audio Message Sequencer
• Built in BACNet for BMS System Integration
• Built in Webserver for Remote Event Notification

Features
Fire Alarm Control
• Expandable up to 8 SLC
• Sub-addressing to optimize the number of devices in each
loop
• Four Style Z/Y (Class A/B) Notification Appliance Circuits rated at 1.7 Amps each with built-in sync protocol
• Supports both 80 character and 960 character back-lit LCD displays with user friendly menu
• Menus and Tags in English, French, Arabic*, Chinese*, Russian*, Spanish and Portuguese. (*needs DSPL-2440 or RAXN-4000LCDG)
• Tags only: it accepts all languages supported by Windows 10 (requires DSPL-2440 or RAXN-4000LCDG)
• Correlatable Switch Inputs which allows for multifunctional outputs
• Four Alarm Queues with selector switches and LEDs for Alarm, Supervisory, Monitor and Trouble
• RS-232 output for remote system printer or terminal
• RS-485 port for system expansion
• Ethernet port for OpenGN workstation or BACNet interface
• Two Event History Logs; one for Alarm-related events and one for all events
• System can be configured without taking the panel off-line
• Supportsthreeconfigurationfiles(current,previousandnext configuration) with “hot swap” support
• Supports Boolean logic functions
• Remote diagnostics via a built-in web server
• UL listed for Smoke Control (UUKL).
Network Features
• Up to 63 nodes
• Peer-to-peer network communications
• Fully integrated digital network audio and control over a single pair of copper wire or fiber optic cable (single or multi-mode)
• Remote diagnostics via built-in web server and standard Ethernet port i