Description

CAMARA FEATURES
*Zoom: (1.) 23X optical zoom with 10X digital magnifier.
(2.) 22X optical zoom with 8X digital magnifier.
(3.) 16X optical zoom with 8X digital magnifier.
*Focus: Continuous Auto-focus or manual focus
*Illumination: Minimum illumination:
(1.) 23X lens : 0.02 lux (0 lux : IR illuminatior ON)
(2.) 22X lens : 0.1 lux
(3.) 16X lens : 1 lux
*DSP: Advanced DSP camera provide:
(1) Auto white balance
(2) Back-light compensation
(3) Auto iris control
(4) IR-cut filter rmove control. (Optical 23X only)
(5) Electronic shutter from ½ (1/1.5) to 1/30,000 sec
*Slow Shutter: Function enable dome to again a brighter video output through shutter speed control. (This function is not equipped for X 16 model.)
*Title Display: Function enable dome to display a string for a view. The title will be displayed on screen if you pass through the region what you saved before.
*IR-Cut filter Removable: (1). 23X lens : Equipped
(2). 22X lens : N/A
(3). 16X lens : N/A
*WDR: (1). 23X lens : Equipped
(2). 22X lens : N/A
(3). 16X lens : N/A
*Privacy Mask: (1). 23X lens : Equipped
(2). 22X lens : N/A
(3). 16X lens : N/A

ROTARY BODY FEATURES
*Camera Size: 5" compact, low profile color dome camera
*Rotation: 360° endless rotation
*Pan speed: Up to 375° /sec
*Tilt speed: Up to 300° / sec
*Preset: Function enable user to record different 128 viewpoints what you want. You can set Pan/ Tilt/ Zoom for every preset position.
*Proportion Zoom: Enable Pan/ Tilt speed inverse proportional to Zoom ratio. You can tracking an object easily with this function.
*Auto-Turn Around: Function allows user to keep tracking object even the object pass through the bottom of camera. You needn't rotate 180 degrees in pan direction to keep observing the object. This function will do this for you quickly.
*Auto-Pan: Function enable dome camera to scan a specific region repeatedly with user defined speed. You can set start point, end point and scan speed to scan a specific region.
*Sequence: Function enable dome camera to switch viewpoints between presents. There are three parameters can be filled into sequence function. You can set "Preset number", "Dwell Time" and "Speed" for sequence line.
*Cruise: Function enable dome camera to scan an user defined path. User can manipulate dome camera with joystick to establish this path.
*Home: Function enable the possibility to lock a viewpoint. Home function will go back to home position when you move the camera to other position and wait for a period.
*Auto Restoring: Function will record current position when user defined period of time is reached. Dome will go to the position if the power of your installation site is recovery after shutdown.
*Remote V-Sync Adjustment: Function enable user to adjust the line lock signal remotely. You can adjust the phase of line lock signal to synchronize the system from keyboard.
*D Protocol and P Protocol Supported from OSD: You can control our dome camera